Home > Articles > All Issues > 2019 > Volume 8, No. 1, January 2019 >

Calculation of Optimum Exchanged Grinding Wheel Diameter When External Grinding Tool Steel 9CrSi

Hoang Xuan Tu 1,2, Gong Jun 2,3, Le Xuan Hung 1, Luu Anh Tung 1, and Vu Ngoc Pi 1
1. Thai Nguyen University of Technology, Thai Nguyen 250000, Vietnam
2. School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China
3. Key Laboratory of Digital Manufacturing Technology and Application, Ministry of Education of China, Lanzhou, China

Abstract—This paper presents a study on the optimum calculation of exchanged grinding wheel diameter when external grinding alloy tool steel 9CrSi. In this study, the effects of the grinding process parameters including the initial grinding wheel diameter, the total dressing depth, the radial grinding wheel wear per dress, and the wheel life on the exchanged grinding wheel diameter were considered. Furthermore, the impact of cost elements including the machine tool hourly rate and the grinding wheel cost were investigated. To evaluate the effect of these factors on the optimum exchanged grinding wheel diameter, an “experiment” was designed, and a computer program was built for performing the “experiment”. Based on the results of the “experiment”, a formula for determining the optimum exchanged grinding wheel diameter was proposed.

Index Terms—external grinding, grinding, grinding process, cost optimization.

Cite: Hoang Xuan Tu, Gong Jun, Le Xuan Hung, Luu Anh Tung, Vu Ngoc Pi, "Calculation of Optimum Exchanged Grinding Wheel Diameter When External Grinding Tool Steel 9CrSi," International Journal of Mechanical Engineering and Robotics Research, Vol. 8, No. 1, pp. 59-64, January 2019. DOI: 10.18178/ijmerr.8.1.59-64

PREVIOUS PAPER
Nonlinear Adaptive Sliding Mode Control of a Rigid Rotor via Contactless Active Bearing
NEXT PAPER
Vibration Signal Processing Using Cepstrum Editing Technique to Enhance Spall-related Vibration Features in Rolling Element Bearings