Home > Articles > All Issues > 2020 > Volume 9, No. 1, January 2020 >

The Mathematical Model of Motion of Particles in Vibrating Conveyors

Zagrja M. Boriskina and Olga O. Baryshnikova
Department of the Theory of Mechanisms and Machines, Bauman Moscow State Technical University, Moscow, Russia

Abstract— The modes of movement of a material point on vibrating inclined surface, characteristic for oscillating vibratory and inertial conveyors are considered. The mathematical model of movement is developed, taking into account both the influence of inertial forces and forces of gravity, and aerodynamic forces. The stated algorithm of determination of parameters of movement of a material point allows to analyze its peculiarities, to detect optimum parameters of movement. 

Index Terms— Oscillating inertial conveyors, oscillating vibrating conveyors, continuous movement of the point, harmonic oscillations, friction force

Cite: Zagrja M. Boriskina and Olga O. Baryshnikova, "The Mathematical Model of Motion of Particles in Vibrating Conveyors" International Journal of Mechanical Engineering and Robotics Research, Vol. 9, No. 1, pp. 76-79, January 2020. DOI: 10.18178/ijmerr.9.1.76-79

Copyright © 2020 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.

PREVIOUS PAPER
The Ability to Use 50% Biodiesel and Supercharging Syngas in Dual Fuel Mode for a Turbocharging Diesel-engine Generator
NEXT PAPER
Design of a Robotic Exoskeleton Force Multiplier for Upper Limb