Home > Articles > All Issues > 2020 > Volume 9, No. 3, March 2020 >

Balancing of Asymmetrical Rhomboid Mechanism of External Heat Source Engine

Gennady A. Timofeev and Eugene O. Podchasov
Department of Robotics and Complex Automation, Bauman Moscow State Technical University, Moscow, Russia

Abstract—Balancing of asymmetrical rhomboid mechanism with forked crank which is used in engines with external heat sources is considered. The main equations for correcting masses (counterweights) and their coordinates calculations are given. The conditions of full static balancing of rhomboid mechanism with forked crank are obtained. 
 
Index Terms— external combustion engine, asymmetrical rhomboid mechanism, balancing, correcting masses.

Cite: Gennady A. Timofeev and Eugene O. Podchasov, "Balancing of Asymmetrical Rhomboid Mechanism of External Heat Source Engine" International Journal of Mechanical Engineering and Robotics Research, Vol. 9, No. 3, pp. 476-480, March 2020. DOI: 10.18178/ijmerr.9.3.476-480

Copyright © 2020 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.

PREVIOUS PAPER
Thermo-Hydraulic Performance of Round Tubes Installed with Double V-Shaped Winglet Vortex Generators: Effect of Blockage Ratio
NEXT PAPER
Last page